MY2510
Compact electromagnetic anechoic box for production linessuch as radio equipment, terminal and module.
Description
Electromagnetic anechoic box (Anechoic chamber) /Shield box Production line type MY2510download
- Compact electromagnetic anechoic box for production lines such as radio equipment, terminal and module.
- By installing the jig inside, shorten the tact time and improve the reproducibility of each communication test.
- Support a wide range of applications and reduce equipment costs.
Specification
Outside Dimensions (approx.) |
315(W)㎜×315(D)㎜×355(H)㎜ (excluding projections) |
---|---|
Inside Dimensions(approx.) |
250(W)㎜×250(D)㎜×250(H)㎜ |
Weight | approx.8.5kg |
Structure | Double structures with radio wave absorber and aluminum plate |
Shielding Characteristics (typ) |
70dB typ@2.4GHz |
Radio wave absorber | MYA-75 (thickness approx. 3cm) |
Reflection Loss | more than 20dB (MYA-75 : more than2.4GHz) |
Connectors |
|
Features
- One touch lock mechanism
The shield effect is maintained despite simple opening and closing motion, and the burden on the operator will be also reduced.
- Safety against overturning
It can be fixed to the working desk or shelf because integrated with the pedestal.
-
- Support to customization
Based on actual operating conditions, the various customizations will be supported. Need extra cost.
Option
I/F module | I/F module is equipped with AC power supply, DC power supply, LAN,USB, SMA, BNC, N, Triaxial, D-sub connectors and Through pipe. The I/F module can be easily replaced if needed. |
---|
Model | Equipped connectors |
---|---|
IFM1 | AC(1pc), LAN(1pc), USB(1pc), D-sub9pin(1pc) |
IFM2 | AC(1pc), LAN(2pcs), USB(2pcs), D-sub9pins(1pc) |
IFM3 | AC(1pc), LAN(2pcs), USB(2pcs), D-sub25pin(1pc) |
IFM4 | DC(1pc), LAN(1pc), USB(1pc), D-sub9pins(1pc), D-sub25pin(1pc) |
IFM5 | SMA(2pcs), BNC(2pcs), N(2pcs), Triaxial(2pcs) |
IFM6 | Through pipe (2 kinds are selectable.) *Inner diameter is different depending on the frequency band. |
Surface treatment of radio wave absorber | This prevents fragment of radio wave absorber from adhering to products. |
---|
Customize
-
- Installing a jig
The specified jig is fixed in the anechoic box after processing the main body. (Only when shipping)
-
- Modification of rear part
If the antenna or connector position is changed in the future, the desired panel can be installed after removing the rear panel.
Library
- Products Catalog
- Technical report
* MICRONIX Corporation reserves the right to make changes in design, specification and other information without prior notice.