MY3710HS
Higher shielding performance than MY3710‥‥≧80dB
Description
- Higher shielding performance than MY3710‥‥≧80dB
- DUT can be operated directly with bare hands while placing it in the box and looking at the inside from the shield window.
- Suitable for weak electric field resistance test, out-of-service test or digital forensics for mobile phone, smart phone or tablet terminal.
Features
Achieving high shielding performance‥‥≧80dB@0.6 to 6GHz
The various radio waves such as 3G / 4G (LTE / WiMAX) / Wi-Fi (2.4GHz & 5GHz bands) which are a mainstream in communication system of mobile terminal will be blocked off.
This performance is realized by our own technology regarding shield window.
DUT can be operated with bare hands
It is possible to put one hand or both hands (optional MY3700-001 is installed) in it. Moreover DUT can be operated with bare hands.
Since it is possible to operate directly with bare hands, poor reaction of touch panel by using the glove type will be eliminated and the fine operation will be able to be done.
Small and light weight
Outside Dimensions:approx.320(W)×260(H)×360(D)mm(excluding projections), Weight:approx. 9kg (excluding I/F module).
10-inch tablet terminal can be put in box.
One touch lock mechanism
Just by turning the knob the lock is released, and when it is closed it is locked just by closing the lid. It is very simple to operate.
Correspond to the various interfaces
By exchanging the optional I/F module, the various interfaces can be used.
Since the noise filter is inserted in almost these interfaces, the influence of noise entering from the cable will be reduced.
Specification
| Outside Dimensions |
approx. 320(W)×260(H)×360(D)mm (excluding projections) |
|---|---|
| Inside Dimensions |
approx. 250(W)×145(H)×290(D)mm |
| Weight | approx. 9kg (excluding I/F module) |
| Structure | Double structures with radio wave absorber and aluminum plate. |
| Shielding Characteristics (typ) |
more than 80dB (600MHz to 6GHz) |
| Reflection loss | more than 20dB (≧2.4GHz) |
| Shield window | approx. 140(W)×140(D)mm |
| Connectors | SMA 4pcs |
| Option |
|
Option
I/F Module
-
I/F module is equipped with AC power supply, DC power supply, LAN, USB, SMA, BNC, N, Triaxial, D-sub connectors and Through pipe.
The I/F module can be easily replaced if needed.Option Equipped connectors IFM1 AC(1pc), LAN(1pc), USB(1pc), D-sub9pin(1pc) IFM2 AC(1pc), LAN(2pcs), USB(2pcs), D-sub9pin(1pc) IFM3 AC(1pc), LAN(2pcs), USB(2pcs), D-sub25pin(1pc) IFM4 DC(1pc), LAN(1pc), USB(1pc), D-sub9pin(1pc), D-sub25pin(1pc) IFM5 SMA(2pcs), BNC(2pcs), N(2pcs), Triaxial(2pcs) IFM6 Through pipe (two kinds are selectable)
*Inner diameter is different depending on the frequency band.
Conduction arm supporter MY3700-002
This increases the conductivity between the shield arm cover because conductive material is used.
LED light(Battery drive) MY3700-102
Internal visibility is improved.
Library
Products Catalog
- Hand-in type electromagnetic anechoic box (Shield box) MY3710HS Catalog (PDF)
- MICRONIX Products DIGEST Catalog (PDF3.75MB)
Technical report
*MICRONIX Corporation reserves the right to make changes in design, specification and other information without prior notice.
