DUT can be operated directly with bare hands while placing it in the box and looking at the inside from the shield window.
Suitable for weak electric field resistance test, out-of-service test or digital forensics for smart phone, tablet terminal or mobile PC.
DUT can be operated with bare hands
It is possible to put one hand or both hands in it. Moreover DUT can be operated with bare hands.
Since it is possible to operate directly with bare hands, poor reaction of touch panel by using the glove type will be eliminated and the fine operation will be able to be done.
Providing wide viewing angle using large shield window
Large shield window of 275 × 255 mm.
Despite of use of shield window, shielding effectiveness over 60dB is ensured at frequency from 600MHz to 6GHz.
The various radio waves such as 3G / 4G (LTE / WiMAX) / Wi-Fi (2.4GHz & 5GHz bands) which are a mainstream in communication system of mobile terminal will be blocked off.
This performance is realized by our own technology regarding shield window.
Correspond to the various interfaces
By exchanging the optional I/F module, the various interfaces can be used.
Since the noise filter is inserted in almost these interfaces, the influence of noise entering from the cable will be reduced.
(excluding I/F module)
|Structure||Double structures with radio wave absorber and aluminum plate.|
|more than 60dB(600MHz to 6GHz)|
|Reflection loss||more than 20dB (≧2.4GHz)|
|Connectors||SMA 6pcs (Both sides each 3pcs)|
I/F module is equipped with AC power supply, DC power supply, LAN, USB, SMA, BNC, N, Triaxial, D-sub connectors and Through pipe.
The I/F module can be easily replaced if needed.
Option Equipped connectors IFM1 AC(1pc), LAN(1pc), USB(1pc), D-sub9pin(1pc) IFM2 AC(1pc), LAN(2pcs), USB(2pcs), D-sub9pin(1pc) IFM3 AC(1pc), LAN(2pcs), USB(2pcs), D-sub25pin(1pc) IFM4 DC(1pc), LAN(1pc), USB(1pc), D-sub9pin(1pc), D-sub25pin(1pc) IFM5 SMA(2pcs), BNC(2pcs), N(2pcs), Triaxial(2pcs) IFM6 Through pipe (two kinds are selectable)
*Inner diameter is different depending on the frequency band.
Conduction arm supporter MY3700-002
This increases the conductivity between the shield arm cover because conductive material is used.
LED light(Battery drive) MY3700-102
Internal visibility is improved.
- Hand-in type electromagnetic anechoic box (Shield box) MY3720 Catalog (PDF)
- MICRONIX Products DIGEST Catalog (PDF3.75MB)
*MICRONIX Corporation reserves the right to make changes in design, specification and other information without prior notice.