Separate and assembled type that can be carried in a personnel elevator and installed in a narrow space
Electromagnetic anechoic box (Anechoic chamber) /Shield box Large Size MY5310S download
- Separate and assembled type that can be carried in a personnel elevator and installed in a narrow space
- This model use the ferrite tile as the electric wave absorber.
- Optimum for EMI test.
- For small EUT and equipped with a turntable of 220mm in diameter / 10kg in load.
Pre-compliance EMI test system MR2300
Pre-compliance EMS test system MR2350
|Door opening dimensions||510(W)×910(H)mm|
|Turntable||220mm in diameter
/10kg in load
|Radio wave absorber||Ferrite tile structured double|
|Reflection Loss||more than 20dB@35MHz to 2.2GHz|
- Easy and convenient to carry.
It becomes easy and convenient to carry MY5310S in such small place as office building because it can be carried after divided into two.
- Carry on by elevator possible.
It is possible to carry MY5310S by using a general size elevator with a capacity of 11 or more persons.
MY5310 adopts a structure for which the work for separation and assembly can be done without any special tool and knowledge.
Therefore, there is such a flexibility as being able to move MY5310S to another place again.
|Dimensions after divided|
|Dimensions of elevator of 11 capacity|
- Table unit( for large-scale EUT )
This unit is equipped with a turntable of diameter 500mm and 50kg load.
- Spacer unit
The space unit of 610mm width inserted between two units divided enables a wider space.
- Products Catalog
- Technical report
*MICRONIX Corporation reserves the right to make changes in design, specification and other information without prior notice.